1, the product name: full pneumatic screen cleaning machine
2, the product model: CJD-PC-S1080
3, the product introduction:
CJD-PC-S1080 series full pneumatic screen cleaner is used for cleaning UV ink\hot solid ink\aluminum paste\silver paste.
The CJD-PC-S1080 series is fully powered by high-pressure air and integrates global quality control actuators such as FESTO (Germany), SMC\CKD (Japan), Ingersoll Rand (USA), G-Doking (Korea), etc. Pneumatic logic control, one-button operation, easy to clean and dry. The cleaning pressure can be adjusted as needed to ensure the stability of the screen tension, thus ensuring a longer service life of the screen.
CJD-PC-S1080 series can use ink special cleaning liquid to complete high-efficiency cleaning. Super Jinda can recommend the most suitable cleaning liquid according to customers' actual needs, such as CJD-C-08\CJD-C- 09 and so on.
4, product technical parameters
Cleaning effect
Cleaning performance
● PCB printing screen (UV ink / thermosetting ink / green oil)
● toys / smart products printing screen
● Ag slurry/Au slurry/Cu slurry/Al slurry
● Electric resistance
● conductive plasma
● Insulation
Main feature
● Unique rotary spray cleaning (or ultrasonic cleaning) + independent spray rinsing + high pressure air drying to ensure the overall high cleanliness of the screen
● Four-stage filtration device to ensure the recycling of cleaning fluid to minimize cleaning fluid loss
● Safety interlocking device and complete machine are completely sealed to ensure production safety and environmental safety
● Automatically add drainage system to effectively reduce labor intensity and save working time
● Special small exhaust vent design to improve the working environment
● The cleaning pressure is adjustable to ensure the stability of the screen tension
● Automatic cleaning frequency counting, convenient for timely replacement of filter element and cleaning solution
● Visual fluid design, convenient for timely filling, to ensure the normal operation of the machine
● Centralized control and easy maintenance
● Integrate global quality components to ensure high stability and reliability
● All stainless steel pipe, safe and durable, durable corrosion resistance
● Unique steel mesh installation design, cleaning steel mesh of different sizes, no need to install fixtures separately
● Longer service life, better performance and higher cost performance than similar products
Product specifications
|
Model
|
CJD-PC-S1080
|
CJD-CPC-S1080
|
|
Dimensions
|
L 800 X W 1370X H 1900 mm
|
L 800 X W 1370X H 1900 mm
|
|
Net weight
|
400 KG
|
500 KG
|
|
Gas source / power supply
|
0.6～0.8 MPa
|
Input voltage AC220V/50Hz
Ultrasonic frequency/power 28KHz 300W
|
|
Air consumption
|
400-600L/min
|
400-600L/min
|
|
Adapt to screen size
|
1100 X 1000mm(MAX) 550X650(MIN)
|
1100 X 1000mm(MAX) 550X650(MIN)
|
|
Four levels of circulation
|
Level 1 20μm Level 2 10μm Level 3 5μm Level 4 1μm
|
Level 1 20μm Level 2 10μm Level 3 5μm Level 4 1μm
|
|
Tank capacity
|
70 L （MAX）
|
70 L （MAX）
|
|
Exhaust port size
|
￠125 X H 30 mm
|
￠125 X H 30 mm
|
|
Necessary exhaust speed
|
5m/sec
|
5m/sec
|
|
Cleaning method
|
Rotary spray cleaning + independent spray rinsing + high pressure air drying
|
Ultrasonic cleaning + rotary spray rinsing + high pressure air drying
|
|
Cleaning time
|
2～5 min ※
|
2～5 min ※
|
|
Drying time
|
2～5min ※
|
2～6min ※
|
|
Applicable solvent
|
Organic solvents CJD-C-06/C-07
|
Water based solvent CJD-C-08/C-09
|
|
※ The cleaning time and drying time are the time required to use our recommended solvent; the exact time varies depending on the type of solvent used.
※ This model is constantly being updated and the external dimensions may vary. The actual size is subject to availability.
※ According to the principle of environmental protection, it is recommended that customers customize the company's products according to the size of the stencil used.
|
5, the basic structure of the product
● Material The outer casing and frame are made of T=2.0mmSUS304# stainless steel plate and 40*40*2mmSUS304# stainless steel square. The internal structure is made of T=2mm SUS304# stainless steel plate. (If the customer chooses to spray the outer casing, the outer casing and the frame adopt T=1.5mm cold-rolled plate and 40*40*2mm cold-drawn square pass, and the surface is sprayed.)
● The upper part is the cleaning studio and the operation panel.
● The lower part is the liquid storage tank, pneumatic diaphragm pump and filtration system.
● The top is an exhaust system with a ¢125mm external exhaust vent
6, installation
Installation place
To ensure safe production and to prevent possible damage to the equipment, the equipment should be installed in a location that meets the following environmental conditions:
Keep away from fire and heat sources,
Air dry, well ventilated
Clean, clean, smooth and vibration-free ground
Installation required spare parts
● The air source pressure is 0.4-0.6MPa, and the flow rate is 400-700L/Min.
● The air source nozzle is ¢12mm, and a quick connector is required.
● The top of the equipment is designed with a mm125mm exhaust port, which needs to be connected to the outside by an independent air duct. When taking over, it is required to turn less than two 90 degrees and the length is less than 6M. Otherwise, it is necessary to increase the forced exhaust fan (the automatic exhaust speed of this equipment is 3M/S).
Precautions
To ensure safe production, the customer must specifically ensure that the following safety measures are in place.
1), with at least 3 meters away from live equipment, away from fire and heat.
2) The ground wire must be connected and grounded separately. It should not be connected to the ground wire of other live equipment.
3) The exhaust duct of this equipment should not be connected to any exhaust duct of equipment that can generate heat source (such as SMT reflow soldering, wave soldering, etc.).
7, after-sales service
● Free 12-month technical support and service after product delivery. Zero or component damage caused by non-human operation errors is repaired by the manufacturer free of charge. Man-made damage to parts is purchased by the customer at the original price, and the manufacturer's labor and travel expenses are paid. After the expiration of the term, continue to provide lifetime paid technical support and services.
● Response time after receiving customer service claims during the warranty period:
Telephone or electronic network communication within 1 hour, provide technical support, please use the party to solve the problem. If it can't be solved, the manufacturer will send a professional sales service personnel to the user company to solve the problem as soon as possible.
